Universal Printers
关于我们
About us
产品展示
Products
销售网络
Sales Network
下载中心
Download
技术支援
Support
视频中心
Video
联络我们
Contact
快速
专业
优越
+86-752-3737218
欢迎查询本公司产品
卓越源自我们不断的追求
Excellent Coming From Our Continuous Pusuit
标题
日期
1、
PCI Card Installation PCI Card Installation(PCI 新安裝程序)
2010.07.23
2、
USB Card Installation USB Card Installation(USB 新安裝程序)
2010.07.23
3、
PCI Card Installation PCI Card InstallationPCI Card Installation(PCI安裝程序)
2007.03.05
4、
Printhead not firing ink Printhead not firing ink(喷头不喷墨)
2007.03.05
5、
Carriage motor(X motor) / Feeding motor(Y motor) not functioning Carriage motor(X motor) / Feeding motor(Y motor) not functioning(喷车电机（X电机）/ 送布电机（Y电机）不能控制)
2007.03.30
6、
Feeding or take-up motor not functioning Feeding or take-up motor not functioning(收放卷电机不受控制)
2007.03.30
7、
X or Y motor overheated (The surface of the motor exceeds 50 degree Celsius) X or Y motor overheated (The surface of the motor exceeds 50 degree Celsius)(X或Y电机运转过热（电机外表面温度高出环境50摄氏度）)
2007.03.30
8、
The parameter of printhead voltage is not correct when uploading or downloading The parameter of printhead voltage is not correct when uploading or downloading(喷头电压调整界面的参数上传或下载不正确)
2007.03.30
9、
Software froze or parameter cannot be saved Software froze or parameter cannot be saved(打印软件死机或参数设置不能保存)
2007.03.30
10、
Printing width does not match the setting width Printing width does not match the setting width(打图的宽度与设定值不一致)
2007.03.30
11、
Printhead not firing ink during printing Printhead not firing ink during printing(打印中喷头断墨严重)
2007.03.30
12、
Ink supply system not functioning Ink supply system not functioning(供墨系统失控)
2007.03.05
13、
Pump is not working 供墨泵不能抽墨
2007.03.30
14、
Ink drops out from the printhead 喷头不停滴墨，供墨泵不停工作
2007.03.30
15、
Interruption during printing 打印出现乱码
2007.03.30
16、
Printer froze or bi-direction changes to uni-direction, carriage hitting the frame, and haves data error 跳PASS
2007.03.30
17、
Carriage is at the origin position, and it moves to the right after pressing “reposition” 喷车在原位，点击“复位”键喷车右移
2007.03.30
18、
Printhead voltage and temperature reading abnormal 电压及温度参数回传不正常
2007.03.30
19、
Carriage moves to the home abnormally(Carriage doesn’t move to right after the left limit switch is pressed and Press either the left or right limit switch, the STS displays “00111” or “001111” if more update Version than V1.16) 喷车复位不正常(碰原位开关后不回走)
2007.03.30
20、
STS displays “00000” or “000001” if more update version than V1.16 after opening software and printer 机器开机后，STS后面显示为00000
2007.03.30
21、
STS displays “00000” or “000001” if more update version than V1.16 after opening software and printer 机器开机后，STS后面显示为00111
2007.03.30
22、
Stop suddenly during printing(12V not correct in the electrical system) 出现打印中突然停止的故障
2007.03.30
23、
Vertical banding on the printed picture 打印的图象上出现水波纹
2007.03.30
24、
Carriage moves normally, but printheads can’t jet ink 喷车运动正常却不能打印，光栅读数有跳动
2007.03.30
25、
Problems resulted from irrelevant installation of PCI card PCI卡安装不当引发的故障
2007.03.30
26、
Problems resulted from irrelevant installation of PCI card 高密线接触不良引发的故障
2007.03.30
